top of page

How To Care For... Works On Paper

Writer: Roth | Escher Art Group
Roth | Escher Art Group
Jul 7
5 min read

THE CHARACTERISTICS OF PAPER

Paper is an absorbent material, easily torn and inherently fragile. It is also highly reactive to light, heat, humidity and acids (both airborne and in adjacent materials). Therefore all paper-based items should be handled carefully and they should be stored or displayed in an environment that doesn’t damage them in any way. Attachments such as tapes, hinges, enclosures, etc. should be of acid-free materials. The best protection for art is an archival quality mat or folder, a well-constructed frame with UV filtering glazing, or flat storage in a well-ventilated area.

 

AGING OF PAPER

Paper will age more slowly if it is made of 100% cotton fibers and is free of bleaches, artificial brighteners, surface coatings and other fillers. Choose papers with the highest content of cotton fiber, known as ‘rag’, and one that is acid-free. Ideally, the best paper would be an all-rag paper with a pH of 7.5 or higher. All materials that are in contact with the artwork should be similarly high quality (acid-free, buffered with calcium carbonate).

 

WHAT DAMAGES PAPER

 

LIGHT: all forms of light, whether sunlight, incandescent, fluorescent, halogen or LED are harmful to paper as well as to certain inks and colors. Depending on the fiber content, paper can darken and become brittle, or bleach and fade. Even indirect sunlight can, over time, be damaging to all the components of paper and media. Use of Ultra-violet filtering Plexiglass or glass will reduce light damage, but framed artwork should be always hung in indirect light

 

HEAT: do not hang works of art near a heat source.  Heat will dry out and embrittle paper, causing it to shrink and distort.

 

HUMIDITY: relative humidity above 70% encourages mildew or staining on paper; it will also cause paper to expand and/or warp. Avoid hanging art on damp or ‘outside’ walls.

Make sure there is space between the art and the glazing (glass or acrylic), and place felt

‘bumpers’ on the corners of the back of the frame to hold it a little away from the wall

(so air can circulate behind it).

 

ATMOSPHERIC POLLUTANTS: air contains a number of gases that deteriorate paper

(ozone, sulphur dioxide, etc.). Framing an artwork greatly reduces exposure to these pollutants and will limit the changes in heat and humidity that occur in unregulated rooms.

Storage in acid-free boxes or folders, in drawers, will also provide good protection.

 

WHAT TO LOOK FOR

Protective housing with alkaline (acid-free, buffered) paper or board

Stable environment (little fluctuation in temperature and humidity); low light levels

Japanese paste for attachments (Lineco wheat paste flour)

 

WHAT TO AVOID

All pressure-sensitive tapes (Scotch, Masking, duct, double-sided tapes)

Spray adhesives, Rubber cement, Elmer’s Glue, YES paste, Titebond wood glue, all dry mount film and photo mount sprays, non-archival backing boards, ordinary color matboards, and corrugated cardboard

Avoid folding or rolling artwork for storage


STORAGE GUIDELINES:

The safest storage for all documents and works of art on paper is flat storage that provides protection against light, acidity, dust, temperature and humidity fluctuations, and air pollution. Proper storage includes archival containers, with no acids, dyes or adhesives that might bleed, or rough edges that might scratch. Objects housed within such an environment need to be separated from one another by interleaving tissues, to avoid surface abrasion, ink transfer and an accumulation of acidic deterioration.

 

Acid is the most harmful threat to paper; it can be absorbed into the paper from the air or any material adjacent to it; the result is discoloration and weakening of the object itself. Temperature and humidity have an immediate effect on paper: exposure to temperatures above 75' F. can embrittle paper significantly, as does relative humidity below 30%. The process of aging is also accelerated by constant fluctuations in both temperature and moisture content: papers maintain their greatest strength when storage conditions are maintained at 50 to 60% relative humidity and 65' F.

 

Moisture also encourages the growth of mold and fungus that will thrive if the print is exposed to high humidity even for a short period. The spores for such growth can be carried in dust and should not be allowed to accumulate in storage boxes or drawers.

 

Exposure to sunlight, whether direct or indirect, causes deterioration of both paper and the media employed. All-cotton papers will bleach in the presence of sunlight and wood pulp papers will darken, but both will weaken from exposure to both visible and ultraviolet light. Watercolor pigments are very susceptible to fading and many dyes and pigments are fugitive (likely to change, fade or disappear) in the presence of indirect light. Sunlight also acts as a catalyst in acid degradation; it will accelerate the physical deterioration of paper as well as its discoloration.

 

Given the inherent fragility of paper and its highly reactive nature with the environment, the following notes should be followed:

 

  • Make sure all paper objects are in good condition before storage; carefully remove them from acidic mats and separate any labels or information to be saved if they are causing stains or indentations. Do not attempt to separate objects from mounts when they are adhered or try to remove adhesive tapes; these tasks should be performed by a conservator.


  • Store all paper objects flat, not folded, in acid-free boxes, folders or envelopes. Objects should not be crammed tightly into a container nor allowed to move too freely; both could cause damage to corners and edges


  • Interleave each object with an acid-free glassine tissue or medium weight acid-free paper to prevent one object from damaging an adjacent one. It is safest to have the interleaving papers cut larger than the object so that each piece can be lifted out on its own "support"; this will minimize direct handling and therefore damage


  • Make sure any object with soft or friable media (pastel, charcoal, flaking pigment, collage) does not have additional heavy objects laid on top of it


  • Keep storage containers away from light and dampness. Do not place boxes directly onto the   floor or stack them tightly; there should always be some air circulating around them.


  • Check periodically for insect infestation and the presence of mold or mildew



FRAMED ARTWORK


It is important to remember that sealed frames are still subject to environmental changes; moisture and heat can be absorbed through the dustcover, and dust can enter at the juncture of frame and glazing. Therefore, framed artwork must still be protected and stored properly. The following are suggestions for long-term storage:

 

Wrap each frame in paper to keep out dust and insects. Bubble wrap can additionally be used outside of the paper to protect fragile finishes and plexiglass which scratches easily. Plastic and/or plastic bags are not recommended because they trap moisture and can provide an environment conducive to mold growth. If storage is to be very long-term, avoid plastic or bubble wrap altogether and cushion with unbleached cotton material or polyester batting.

 

Avoid pressure-sensitive tapes (Scotch ™, masking, duct tape, etc) when wrapping frames or containers. Substitute cloth tape or undyed twine for tying.

 

Keep frames off the floor by resting them on padded supports (for example, bricks covered with carpeting) or on shelves lined with carpet scraps or acid-free corrugated board.

 

Store them away from exterior walls which tend to contain more moisture than interior walls and are subject to greater fluctuations in temperature.

 

If frames are stacked up next to one another, make sure hardware is not puncturing or scraping adjacent frame. It is standard practice to stack frames face-to-face and back-to-back.

 

Label the outside of each wrapped frame as to what the item is so you don't have to open package repeatedly to discern contents; include information regarding artwork, glazing material, any special handling it should receive, and the date it was framed. If it is particularly heavy, note that on the label as well. Store with label facing out. Always write information in pencil, not ink.

 

If you are concerned about the amount of relative humidity in the storage area, tack up a humidity indicator strip and read once a week for a month to see how much fluctuation takes place. It is wise to check the strip at different times of the day.

 

Check periodically for insects and mold; keep storage area well vacuumed.

bottom of page